
- 比利時StuvEX防爆與防火設備
- 美國RCS腐蝕產品監測設備
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制,過濾,分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量?jī)x器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德爾格Draeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼(MICRONICS)超...
- 美國AII氧分析儀
產品詳情
簡單介紹:
Panterra Sensor
Panterra是支持多種化學品和技術的一系列檢測智能氣體探測器。
產品家族的成員按傳感器類型是有區別的,選擇根據使用要求和目標類型的傳感環境而定(如濕度條件下厭氧和零)。
詳情介紹:
Panterra Sensor
Panterra是支持多種化學品和技術的一系列檢測智能氣體探測器。
產品家族的成員按傳感器類型是有區別的,選擇根據使用要求和目標類型的傳感環境而定(如濕度條件下厭氧和零)。
Supported sensor types include thermal conductivity, metal-oxide semiconductor (MOS), electrochemical, catalytic (pellistor), and acoustic devices.
The detectors are offered as self-contained units or with extendable sensing heads.
Power consumption varies according to sensor type from 100mW to 1W. Input powering options are 5VDC (regulated) or 7-40VDC / 7-60VDC (unregulated).
Specification Information
Panterra是支持多種化學品和技術的一系列檢測智能氣體探測器。
產品家族的成員按傳感器類型是有區別的,選擇根據使用要求和目標類型的傳感環境而定(如濕度條件下厭氧和零)。
Supported sensor types include thermal conductivity, metal-oxide semiconductor (MOS), electrochemical, catalytic (pellistor), and acoustic devices.
The detectors are offered as self-contained units or with extendable sensing heads.
Power consumption varies according to sensor type from 100mW to 1W. Input powering options are 5VDC (regulated) or 7-40VDC / 7-60VDC (unregulated).
Specification Information
- One common interface for several sensor/gas types
- 10-bit auto-ranging sensor sampling system
- Normal, Warning, Alarm & Error states
- Bi-color LED status indicator
- Optional NO or NC dry relay
- Auto-resetting or latching operation
- Optional 0-to-5V proportional output (10 bits)
- Optional binary operation (TTL output)
- Optional voltage encoded state output (analog)
- Optional alarm beeper
- PK-Port™ compatible digital communications
- User-settable alarm/warning via PK-Port™
- Digital FLASH-based calibration
- Each device factory pre-calibrated
- Field re-programmable firmware
- Active temperature compensation (as required)
- Sensor & temperature error detection
- Optional extendable sensor head
- 5VDC, 7-40VDC or 7-60VDC input power
- 500 mW operating power (typical)
Action Level Options:
Alarm level specified as "PN-Sx-Gyy-Annn", where:
"x" is the sensor type code (EG "ST" denotes thermal conductivity)
"yy" is the target gas code (EG "GOX" implies oxygen)
"nnn" is alarm level (% of sensing range)
Warning level specified as "Wpp" where "pp" is percentage of sensing range
Error Handling Options:
1. Audio-visual indication of errors [E1]
2. Errors trigger alarms (fail safe) [E2]<!--[endif]-->
Alarm level specified as "PN-Sx-Gyy-Annn", where:
"x" is the sensor type code (EG "ST" denotes thermal conductivity)
"yy" is the target gas code (EG "GOX" implies oxygen)
"nnn" is alarm level (% of sensing range)
Warning level specified as "Wpp" where "pp" is percentage of sensing range
Error Handling Options:
1. Audio-visual indication of errors [E1]
2. Errors trigger alarms (fail safe) [E2]<!--[endif]-->
Overdose Handling Options:
(Applies to MOS hydrogen sensor only)
1. Failure to hypersensitivity [X1]
2. Failure to persistent error state [X2]
Output Signal Option:
1. TTL - Norm.-high, Auto (self-clearing) [O1]
2. TTL - Norm.-low, Auto (self-clearing) [O2]
3. TTL - Norm.-high, Latch (Button reset) [O3]
4. TTL - Norm.-low, Latch (Button reset) [O4]
5. Proportional output - 0 to 5VDC [O5]
0.5V safety offset (zero reading)
1000 steps of 4.9mV each
Each step equals one resolution unit
6. State step - 0 to 5VDC [O6]
Relay Options
1. Relay not required [R0]
2. Normally-closed, Auto (self-clearing) [R1]
3. Normally-open, Auto (self-clearing) [R2]
4. Normally-closed, Latch (Button reset) [R3]
5. Normally-open, Latch (Button reset) [R4]
Specify relay to respond to warning state, alarm state, or both.
<!--[endif]-->
(Applies to MOS hydrogen sensor only)
1. Failure to hypersensitivity [X1]
2. Failure to persistent error state [X2]
Output Signal Option:
1. TTL - Norm.-high, Auto (self-clearing) [O1]
2. TTL - Norm.-low, Auto (self-clearing) [O2]
3. TTL - Norm.-high, Latch (Button reset) [O3]
4. TTL - Norm.-low, Latch (Button reset) [O4]
5. Proportional output - 0 to 5VDC [O5]
0.5V safety offset (zero reading)
1000 steps of 4.9mV each
Each step equals one resolution unit
6. State step - 0 to 5VDC [O6]
Relay Options
1. Relay not required [R0]
2. Normally-closed, Auto (self-clearing) [R1]
3. Normally-open, Auto (self-clearing) [R2]
4. Normally-closed, Latch (Button reset) [R3]
5. Normally-open, Latch (Button reset) [R4]
Specify relay to respond to warning state, alarm state, or both.
<!--[endif]-->
Audio Sounder Options
1. No beeper [S0]
2. Included beeper [S1]
Enclosure Options
1. Open-frame (Circuit board only) [P0]
2. Anodized aluminum case (No flange) [P1]
3. Anodized aluminum case (With flange) [P2]
Sensor Placement Options
Sensor heads can be housed within the control unit or can be extended via a cable. Extended sensors are house in a flanged aluminum enclosure.
1. No sensor extension [L0]
2. Sensor extended "n" meters [Ln]
Powering Options
1. 5 VDC (+/- 5%) [I1]
2. 7-to-40 VDC switch mode PSU [I2]
3. 7-to-60 VDC switch mode PSU [I3]
Accessories
H-Tech Shipping Information
Estimated Ship Dimensions: " x " x "
• Estimated Ship Weight: lbs
• Lead time: 14 days
• Shipping origin: Vancouver, Canada
Please contact us for pricing on this product.
H-Tech's Shipping Policy
1. No beeper [S0]
2. Included beeper [S1]
Enclosure Options
1. Open-frame (Circuit board only) [P0]
2. Anodized aluminum case (No flange) [P1]
3. Anodized aluminum case (With flange) [P2]
Sensor Placement Options
Sensor heads can be housed within the control unit or can be extended via a cable. Extended sensors are house in a flanged aluminum enclosure.
1. No sensor extension [L0]
2. Sensor extended "n" meters [Ln]
Powering Options
1. 5 VDC (+/- 5%) [I1]
2. 7-to-40 VDC switch mode PSU [I2]
3. 7-to-60 VDC switch mode PSU [I3]
Accessories
Evaluation kit
|
KnowzNet™
|
|
![]() |
![]() |
H-Tech Shipping Information
Estimated Ship Dimensions: " x " x "
• Estimated Ship Weight: lbs
• Lead time: 14 days
• Shipping origin: Vancouver, Canada
Please contact us for pricing on this product.
H-Tech's Shipping Policy