
- 比利時StuvEX防爆與防火設備
- 美國RCS腐蝕產品監測設備
- 盧森堡ROTAREX羅達萊克斯滅火系...
- 意大利GM SISTEMI火花探測及...
- 西班牙ADIX安迪克斯抑制爆炸系統
- 備盈倍BS&B防爆**系統
- 賀爾碧格Newson Gale防爆靜...
- 賀爾碧格hoerbiger防爆**系...
- 意大利Aircom愛科粉塵防爆設備
- 法國Stif斯緹福粉塵防爆設備
- 西班牙Adix安迪克斯隔爆閥抑制系統...
- 瑞士Rico瑞科爆炸隔離閥
- 意大利Control logic康洛...
- 意大利Control logic康洛...
- 意大利科恩除塵和防爆產品
- 美國Argus火花和金屬探測以及回收...
- 美國Edwards愛德華消防報警系統
- 美國Kidde凱德廚房滅火和空氣采樣...
- 美國Marioff HI-FOG高壓...
- 挪威納斯克激光氣體分析儀
- 德國Rembe認必泄壓爆破片及隔離塵...
- 英國Amal阻火器
- 英國Marvac呼吸閥和緊急泄放閥以...
- 英國Marston防爆板和爆破片
- 美國ZOOK防爆板
- 瑞士Rico-Ventex隔爆閥
- 德國GreCon格雷康火花探測器以及...
- 德國Eltex埃爾特克斯防爆靜電接地...
- 美國迪康氣體檢測設備
- 美國PAC實驗室和在線分析儀器
- 奧德姆/安姆特儀器產品
- 美盛環境監測行業成套系統工程
- 美盛流體污染控制,過濾,分離凈化產品
- 美國Norman不銹鋼高壓過濾器
- 美國施羅德過濾器以及過濾系統
- 韓國杜科給水設備以及泵系統
- 美國Cameron卡麥龍過程控制和閥...
- 美國BARTON測量?jī)x器儀表
- 美國NUFLO儀表產品
- 美國clif mock采樣設備和系統
- Caldon超聲波技術產品
- 美國Cameron/Barton卡麥...
- 美國Pentail濱特爾油液凈化設備...
- 韓國雷尊泰克REZONTECH火焰探...
- 韓國CSA Bestouch火焰探測...
- 科馬特泰克色譜技術產品
- 英國愛丁堡Edinburgh ins...
- 歐美Cerex/AquaRead等進...
- 歐文凱利自控閥設備
- 德?tīng)柛馜raeger**檢測設備
- 美國Det-tronics火焰探測器...
- 泵閥控制
- 美國Honeywell生命**產品
- 密析爾濕度和露點儀表
- 美國TIF公司鹵素檢漏儀
- 美國Teledyne Analyti...
- 美國泰科SCOTT健康和**
- 日本日置HIOKI電測產品
- 英國梅克羅尼(MICRONICS)超...
- 美國AII氧分析儀
產品詳情
簡單介紹:
7600 - Non-Dispersive Infrared Gas Analyzer
Teledyne公司的7600系列紅外(IR)的氣體分析儀可以檢測多達四個選擇的能力,個別紅外吸收組件(即一氧化氮,二氧化硫,二氧化碳,一氧化碳,甲烷和)在連續的基礎上可以實現即時檢測分析。
詳情介紹:
7600 - Non-Dispersive Infrared Gas Analyzer
Teledyne公司的7600系列紅外(IR)的氣體分析儀可以檢測多達四個選擇的能力,個別紅外吸收組件(即一氧化氮,二氧化硫,二氧化碳,一氧化碳,甲烷和)在連續的基礎上可以實現即時檢測分析。
Model 7600 - Non-Dispersive Infrared Gas Analyzer
Teledyne's Series 7600 Infrared (IR) Gas Analyzer is capable of detecting up to four chosen, individual IR absorbing components (i.e. NO, SO2, CO2, CO, and CH4) on a continuous basis.
Conveniently packaged in either a 19" rack mount or NEMA-4 wall mount enclosure,
the Series 7600 can also be supplied with an oxygen sensor, providing the operator with a space-saving, five in one, cost-effective design. The NEMA-4 enclosure can be X or Z-purged to satisfy hazardous area installation requirements.
FEATURES
OPTIONS
Teledyne公司的7600系列紅外(IR)的氣體分析儀可以檢測多達四個選擇的能力,個別紅外吸收組件(即一氧化氮,二氧化硫,二氧化碳,一氧化碳,甲烷和)在連續的基礎上可以實現即時檢測分析。
Industrial Products |
|
|
Teledyne's Series 7600 Infrared (IR) Gas Analyzer is capable of detecting up to four chosen, individual IR absorbing components (i.e. NO, SO2, CO2, CO, and CH4) on a continuous basis.
Conveniently packaged in either a 19" rack mount or NEMA-4 wall mount enclosure,
the Series 7600 can also be supplied with an oxygen sensor, providing the operator with a space-saving, five in one, cost-effective design. The NEMA-4 enclosure can be X or Z-purged to satisfy hazardous area installation requirements.
FEATURES
- Simultaneous measurement of up to five components
- Excellent long-term stability
- Large, easy to read LCD display showing all simultaneous measurements and computations
- Slide-out, chassis design to facilitate any optical or maintenance adjustments required to fine tune analyzer performance (7600A)
- In-depth, valuable analyzer functions attainable from the front-panel user interface buttons
- Follow & Hold output signal control (during calibration)
- Remote range change control
- Low / Hi limit alarms
- Range ID signals
- Auto-calibration with user adjustable frequency and gas flow time setting programming capabilities
- Remote auto-calibration initiation
- Auto-calibration status contacts
- Instrument or calibration error contact outputs
- Extra functions included such as average value computation, O2 conversion
- Follow & Hold output signal control (during calibration)
OPTIONS
- Percent O2 detector Paramagnetic (built-in) or ZrO2 (externally installed), user preference
- O2 correction (the conversion of measured CO and SO2 readings into values at standard O2 concentration). Consult factory for more detail of functionality
- Communication functions:
- RS-232C (9 pins D-Sub connector)
- Half-duplex bit serial
- Modbus protocol