国产成人精品午夜福利2021-GOGO人体无码一区二区-亚洲制服丝袜中文字幕在线-奇米777四色影视在线看
產品詳情

  • 產品名稱：V & X Dual Seal Plunger

  • 產品型號：V & X Dual Seal Plunger
  • 產品廠商：其它品牌
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
V & X Dual Seal Plunger 中風調節變得更加緊湊和調整是一個內部線程設計簡化。鎖定裝置的積極持有行程長度交通便利，易于操作。氣動活塞和引導流體在柱塞大會上保障了，但運動的密封柱塞同心聚四氟乙烯復合軸承兩端。之間的回位彈簧和柱塞間隙進行了優化，以消除任何可能的聯系
詳情介紹：
V & X Dual Seal Plunger
中風調節變得更加緊湊和調整是一個內部線程設計簡化。鎖定裝置的積極持有行程長度交通便利，易于操作。氣動活塞和引導流體在柱塞大會上保障了，但運動的密封柱塞同心聚四氟乙烯復合軸承兩端。之間的回位彈簧和柱塞間隙進行了優化，以消除任何可能的聯系
V Dual Seal Plunger

"V" Pump Features

 


VXcross
 

  1. Stroke Adjuster is made more compact and adjustment is simplified with an internally threaded design. The positive locking device to hold stroke length is readily accessible and easy to operate.
  2. The Pneumatic Piston and Fluid Plunger Assembly is guided at both ends on TFE composite bearings ensuring concentric movement of the plunger though the seals.
  3. The clearance between the return spring and plunger has been optimized to eliminate any possible contact.
  4. A true double sealing arrangement is used so that secondary seal containment is provided.
  5. Lubrication has been simplified with the use of synthetic grease. The lubrication chamber is filled once over the life of the seals.
  6. The bleeder is equipped with a barbed fitting for plastic tubing so that the fluid bled from the fluid chamber can be collected.
  7. Both the discharge and suction check valves have tough TFE composite seats for long life and positive sealing.
  8. Threaded port after the secondary seal provides for the indication, collection or containment of any seal leakage
動力沖程：
作為控制器的空氣或氣體進入氣動傳動氣缸，活塞驅動柱塞裝配成的液腔，取代液體和壓縮回位彈簧。由于柱塞取代了液體，在壓力升高的吸力單向閥關閉，并打開出口止回閥。
吸入沖程：
當空氣或氣體耗盡的氣動驅動力氣缸的活塞回位彈簧柱塞大會返回到原來的位置。在流體中的腔壓力下降造成的活塞回縮允許出口止回閥彈簧加載，關閉和吸力單向閥打開，使流體腔室又充滿了力量和行程做好準備。
V Dual Seal Plunger

Operation

 


POWER STROKE:
As the CONTROLLER air or gas enters the PNEUMATIC DRIVE CYLINDER, the PISTON-PLUNGER ASSEMBLY is driven down into the FLUID CHAMBER, displacing fluid and compressing the RETURN SPRING. As the plunger displaces the fluid, the rise in pressure closes the SUCTION CHECK VALVE and opens the DISCHARGE CHECK VALVE. A precise amount of fluid, corresponding to the stroke of the plunger, is discharged.

SUCTION STROKE:
When the air or gas is exhausted from the PNEUMATIC DRIVE CYLINDER the RETURN SPRING forces the PISTON-PLUNGER ASSEMBLY to return to its original position. The drop in pressure in the FLUID CHAMBER caused by the retraction of the piston allows the spring loaded DISCHARGE CHECK VALVE to close and the SUCTION CHECK VALVE to open so that the FLUID CHAMBER is again filled and ready for the power stroke.

V Dual Seal Plunger

Performance Guidelines

 


Vperf
 

* This data should only be used to provide you with your initial size selection. You must refer to the actual performance graphs in order to verify your pump selection.

* 請輸入您的名字，方便我們和您聯系
* 請輸入您的電話，方便客服及時解答您的問題
* 請輸入您詳情地址，方便詳細提供當?shù)氐氖袌鲇嵪?